New Additions to Laney's Concept Powered Mixer Line

Click image for closeup Click image for closeup

Winter NAMM '05 saw the launch of two new Concept mixer amplifier models from Laney - the CD1042S and CD1090S.

These new additions to the Concept mixer range offer the user that little bit extra, such as a pair of dedicated 7 band graphics, one for each side of the main stereo mix on the CD1042S or on the CD1090S, a dedicated 7 band graphic to the main stereo signal and an independent 7 band EQ for the monitor signal.

The CD1042S and CD1090S both posses flexible power amp sections which can be configured either: - Left & Right, Bridge or Main& Monitor modes. In bridge mode the CD1042S pushes out 400 watts RMS, whilst the CD1090S with its added flexibility kicks out 600 watts RMS in bridge mode whilst also giving you a 300 watt monitor mix independently. CD1042S Specifications:

• 2 x 200W,
• 4 Ohms each amp,
• 10 channels
• Channels 1-6 XLR Jack,
• Channels 7/8 & 9/10 Stereo/Mic Inputs,
• All Channels feature 3 band EQ, Mon send, Aux/FX send, Pan and Level controls,
• Master Section includes Aux out, Aux In with Level, Tape In with Level, Tape out,
• monitor , left and right line level outputs, 2 mono 7 band graphic EQ's & 5 led level
• meters, Switchable power amp modes - Main Bridged, Main L & R and Main+Mon,
• 16 FX DSP section with separate routing level control to Right/main and left/monitor,
• F/S socket
• FX bypass,
• CD/MD in,
• Record Out,
• Globally Selected Phantom power,
• 2 Jack speaker out for each amplifier + single bridge out jack,
• Built in Clip limiters and relay output protection,
• Rugged metal corners, strap handle & anti vibration feet.

CD1090S Specifications:

• 3 x 300W - 300W Stereo and 300 Watt monitor mix,
• 4 Ohms each amp,
• 10 channels,
• Channels 1-8 XLR Jack,
• Channel 9/10 Stereo/Mic Inputs,
• All Channels feature 3 band EQ, Mon send, Aux/FX send, Pan and Level controls,
• Master section includes Aux Out, Aux In with Level, Tape In with Level, Tape out, Monitor , left and right line level outputs, 1 stereo 7 band graphic EQ's & twin 5 led level meters for left and right outputs, 1 mono 7 band graphic EQ & 5 Led Level meter for monitor output. Switchable power amp modes - Main Bridged, Main L & R and Main+Mon,
• 16 FX DSP section with separate routing level control to Right/main and left/monitor,
• F/S socket,
• FX bypass,
• CD/MD in,
• Record Out,
• Globally Selected Phantom power,
• 2 Jack speaker out for each amplifier ( Monitor, Left and Right) + single bridge out jack, Built in Clip limiters and relay output protection,
• Rugged metal corners, strap handle & Anti vibration feet.

For more information, visit their web site at www.laney.co.uk.