Two New Rode Condenser Microphones Announced

Jan 22, 2002

Click image for closeup

The RODE NT4 is a studio grade condenser microphone, supplied complete in a RODE case with a stand mount, wind shield and custom stereo cables which include both XLR and Mini Jack connectors. This makes the NT4 a totally flexible unit and enables direct connection to most recording devices. It utilizes two 1/2" capsules in a 90 degree, XY arrangement. The NT4 requires 48V phantom power but for ultimate flexibility and ease of use, a 9V battery can also be used. Great for location recordings.

The RODE NT5 is a true condenser microphone specifically designed for optimum instrument recording. It performs well on all instruments including guitar, flute, violin, saxophone, drums etc. It's discrete size and design allows for effective and subtle positioning which is crucial when close mic'ing. NT5's are supplied as closely matched pairs in a custom carry case with two stand mounts and two wind shields.

Both the NT4 and NT5 exhibit a full frequency response, low noise levels and the quality craftsmanship which is associated with RODE MICROPHONES.

Acoustic Principle: Stereo Microphone. 90° XY placement. Each side comprises an externally polarised single diaphragm condenser transducer

Capsule Size: 0.5" (13mm)

Active Electronics: JFET Impedance converter with bipolar output buffer

Pickup Pattern: Cardioid per capsule Output Impedance: 200 Ohms per side

Frequency Response: 20Hz - 20kHz Sensitivity: -38 dB re 1 v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL

Equivalent Noise: <16 dBSPL, (A-weighted per IEC268-15). Maximum Output: +13.9 dBu @ 1 % THD into 1 k-Dynamic Range: >128 dB

Maximum SPL: 143 dB @ 1% THD into lk Signal/Noise Ratio: 78dB

Power Requirements: 4 mA, P48 (38V-52V) 2 mA, P24 (20V-26V) 2.8 mA, P12 (10.8V-13.2V) 2.4mA using 9V battery

Packed Weight: 2.3kg (Mic only 4808)

NT5 Specifications

Acoustic Principle: Externally polarised single diaphragm condenser transducer

Capsule Size: 0.5" (13mm)

Active Electronics: JFET Impedance converter with bipolar output buffer

Directional Response: Cardioid Frequency Response: 20Hz to 20kHz

Sensitivity: -38 dB re 1 v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL

Equivalent Noise: <16 dBSPL, (A-weighted per IEC268-15).

Maximum Output: +13.9 dBu @ 1 % THD into 1 k-Dynamic Range: >128 dB

Maximum SPL: 143 dB @ 1 % THD into 1 k - Signal to Noise: 78dB

Power Requirements: 4 mA, P48 Supply (38V-52V) 2 mA, P24 Supply (20V-26V) The microphone operates in accordance with the above specifications to a minimum of 18V. It will operate with some performance degradation below 18V)

Packed Weight: 1.8kg (Mic only 100g)

For more information, visit their web site at www.rode.com.au.