 | | Click image for closeup |
| Wireless Cardioid Microphone System. Made by Line 6. (LP.L6XDR953)
Providing total freedom, superior tone and refreshing simplicity, the X2 XDR953 Head-worn Wireless Microphone System is a breakthrough in wireless technology. This professional cardioid microphone system is the ideal choice for vocalists and presenters seeking maximum isolation, reduced feedback and stage-worthy reliability. X2 XDR953 produces a crystal-clear sound comparable to that of high-quality audio cables. The tone is rich, full and free of compression, unlike the notoriously “squashed” sound of many analog wireless systems. Even at the outer reaches of its 300-foot range, X2 XDR953 delivers the full scope of its extended frequency response. All Line 6 Digital Wireless systems, including X2 XDR953, protect your performance with an extra layer of signal protection. Exclusive dual-RF technology shields against static, jamming and dropouts for additional stability and dependability. Complete with everything you need, X2 XDR953 includes X2 XDR4 digital rackmount receiver and X2 XDT4 digital bodypack transmitter (both constructed of polycarbonate housings impact-tested to 300 lbs.), Audio Technica® ATM75-X head-worn cardioid microphone, all applicable antennas, batteries and power supply. Free of complicated setup, just fire it up and go. 
Specifications: Overall System Specifications - Transmission Format: Line 6 proprietary digital audio transmission
- Frequency Response: 10 Hz - 20 kHz
- Audio Dynamic Range: Greater than 118 dB
- Distortion: 0.03% THD
- RF Carrier Frequency: 902 MHz to 928 MHz, FSK, dual frequency transmission
- Compatible Channels: Five
- RF Output Power: 15mw
- Audio Output Level: Unity gain with transmitter input
- Polarity: Positive voltage at input yeilds positive voltage at output
- Transmission Range: 300 feet line-of-sight (may vary due to local conditions)
- FCC Approval: Part 15 approved, no user-license required
- Operating Temperature Range: -20° to +85° C (-4° to +185° F)
XDT4 Transmitter Specifications - A/D Conversion: 24-bit Delta Sigma, 128 times over sampling
- Input Impedance: 1.2 M-ohm instrument input, 10K-ohm mic input
- Connectors: 1/8" Unbalanced locking connector
- Controls: Power On/Off, Channel Select
- Five Segment LED Display: Power On, Channel, Battery Life, Audio Level Meter
- Dimensions (WxHxD): 2.4 x 4 x .8" (6.09 x 10.16 x 2.03 cm)
- Battery Life: 9V alkaline, switching power supply, two modes:
Q-DiversityPLUS™ mode: ~5.5 hrs in (dual frequency)
Q-Diversity™ mode: ~6.5 hrs in standard (single frequency) - Weight: .25 lbs. (with 9V battery installed)
- Housing: Polycarbonate, impact tested to 300 lbs
XDR4 Receiver Specifications - D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
- Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
- Connectors: 1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR Balanced 600 ohm
- LED Display: Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter
- Controls: Power On/Off, Channel Up and Down
- Dimensions (WxHxD): 16.2 x 1.75 x 7.5" (41.14 x 4.44 x 19.05 cm)
- Power Requirements: 9V DC 500mA via included AC/DC adapter
- Weight: 2.5 lbs (with rack hardware and antenna installed)
- Housing: Polycarbonate, impact tested to 300 lbs
Browse Similar Items in:
Stage Headset Dynamic Mics
Stage Vocal Microphones
Vocal Wireless Systems For The Stage
|
Cart
