Randall RM100M2 MTS Series 100-Watt Modular Guitar Tube Amplifier Head - w/ Blackface, Plexi and XTC Preamps

A Head with no Rival!

Randall's flagship sets the standard and will forever revolutionize how future tube heads are designed. The MTS series amp heads are both traditional and modern technology rolled into one amplifier. The RM100M2 has 3 independent modular channels that can be loaded with your choice and combination of Randall's tube preamp modules. The RM100M2 comes loaded with 3 preamps: Blackface(Clean), Plexi(Distorted) and XTCDistorted).

But here's the great part: Looking for a different tone? No need to buy a different amp! Check out Randall's full line of MTS preamp modules, and swap out one preamp for another in a matter of minutes. With more than a dozen tube preamps always available, chances are you'll have a hard time picking just three.

Change and bias your own power tubes! Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Replace only the small protection fuse and tube using a small voltage meter and small screwdriver to adjust each individual bias point.

And that's not all! Connect your RM100M2 to any MIDI capable external processing and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect, using the included RF3 MIDI footswitch, press and hold the channel switch button on the head for 2 seconds and hit the store button of the processor to save the preset. The included footswitch will then select both the RM100M2 channel and effect you want at the same time.

Specs:

• Comes with 3 preamp modules:
  • Blackface(Clean)
  • Plesi(Distorted)
  • XTC(Distorted)
• 100 Watts
• 6L6 Power tubes
• MIDI in/thru
• Master Volume, Presence, Density controls
• Parallel loop w/front panel mix control
• Series loop
• Rear tube bias section
• Slave out
• 3-button MIDI footswitch included
• World voltage AC input selector (100/120/220/240)

When Would This Item Ship?
• Orders are processed Mon-Fri, excluding holidays. An order placed now would be processed on Tuesday, 5/29/2012.

• The average lead time for item UR.RM100M2 is 3 business days, which means an estimated ship date of Friday, 6/1/2012 if you place your order now.

To estimate when it would arrive, please enter the destination US zipcode below:

Enter US Zip Code: